BPLLZ - MM MOTOR OIL

  • MSDS: BPLLZ
  • Manufacturer: PHILLIPS 66 COMPANY
  • Product Name: MM MOTOR OIL
  • National Stock Number: 9150-00N031613
Product Identification

Product ID:MM MOTOR OIL
MSDS Date:01/01/1987
FSC:9150
NIIN:00N031613
MSDS Number: BPLLZ

Responsible Party
PHILLIPS 66 COMPANY
758 ADAMS BLDG 4TH & KEELER
BARTLESVILLE, OK 74004
US

Emergency Phone: 918-661-3865;918-661-8118

Info Phone: 918-661-4400

Cage: 46935

Contractor
PHILLIPS PETROLEUM CO
BARTLESVILLE, OK 74004 US

Telephone: 800-234-6603

Cage: 46935

Ingredients

HYDROCARBONS (PEL/TLV AS OIL MIST)

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3;10 STEL

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: MILD IRRIT. SKIN:
PRACTICALLY NON-TOX BY SKIN ABSORP. MILD IRRIT W/PRLNG/RPTD CONT.
INHAL: NONE EXPECTED. INGEST: PRACTICALLY NON-TOX. CHRONIC: NO
KNOWN APPLICABLE INFO. CONTINUOUS SKIN CO NTACT WITH USED MOTOR
OILS HAS CAUSED SKIN CANCER IN LAB ANIMALS. AVOID PROLONGED SKIN
CONTACT W/USED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: MOTOR OIL. PRESSURIZED INJECTION OF
PRODUCT UNDER SKIN CAN LEAD TO SERIOUSLY INFLAMMED TISSUE. IF LEFT
UNTREATED INJURY CAN BE GANGRENOUS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: FLUSH W/RUNNING H2O FOR @ LST 15 MIN. IF IRRIT DEVELOPS,
SEEK MED ATTN. FOR INJECTION INJURIES, IMMED MED TRTMT IS REQD.
PHYS MAY CALL (918)661-4845. SKIN: WASH W/SOAP/H2O. IF IRRIT
DEVELOPS, SEE K MED ATTN. FOR INJECTIONS INJURIES, IMMED MED TRTMT
IS REQD. PHYS MAY CALL (918)661-4845. INHAL: REMOVE FROM EXPOS. IF
ILLNESS/ADVERSE SYMP DEVEL, SEEK MED ATTN. INGEST: GIVE 2 GLASSES
(SUPP DATA)

Fire Fighting

Flash Point Method:COC
Flash Point:>280F,>138C
Extinguishing Media:DRY CHEMICAL, FOAM OR CO2.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
EVACUATE AREA OF ALL UNNEC PERS. SHUT OFF SOURCE, IF POSS. H2O FOG/
SPRAY MAY BE USED TO COOL EXPOS (SUPP DATA)
Unusual Fire/Explosion Hazard:CARBON OXIDES AND VARIOUS HYDROCARBONS
FORMED WHEN BURNED.

Accidental Release

Spill Release Procedures:WEAR PROT EQUIP &/OR GARMENTS IF EXPOS CNDTNS
WARRANT. SHUT OFF SOURCE, IF POSS & CNTN SPILL. PROTECT FROM IGNIT.
KEEP OUT OF H2O SOURCES & SEWERS. ABSORB IN DRY, INERT MATL
(SAND,CLAY, SAWDUST, ETC.) . TRANSFER TO DISPOSAL DRUMS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID INHAL OF MIST & EYE CONT. AVOID
RPTD CONT W/SKIN. WEAR PROT EQUIP &/OR GARMENTS IF EXPOS CNDTNS
WARRANT. LAUNDER CONTAM CLTHG BEFORE REUSE.
Other Precautions:STORE AWAY FROM IGNIT SOURCES. PROVIDE MEANS OF
CONTROLLING LEAKS & SPILLS. KEEP CONTAINERS CLOSED. WHERE
SPECIAL/UNUSUAL USES/CNDTNS EXIST, IT IS SUGGESTED THE EXPERT
ASSISTANCE OF INDUST HYGIENIST/O THER QUALIFIED PROFESSIONAL BE
SOUGHT.

Exposure Controls

Respiratory Protection:NOT GENERALLY REQUIRED. FOR CONCENTRATIONS
EXCEEDING RECOMMENDED EXPOSURE LEVEL, USE NIOSH/MSHA APPROVED AIR
PURIFYING RESPIRATOR.
Ventilation:USE ADEQUATE VENTILATION TO CONTROL EXPOSURE BELOW
RECOMMENDED LEVELS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD.
Other Protective Equipment:USE PROT GARMENTS TO PREVENT EXCESSIVE SKIN
CONTACT. LAUNDER CONTAM CLTH BEFORE REUSE.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
SPEC GRAV: 0.86-0.94(H2O=1). FIRE FIGHT PROC: CONTAINERS AND EQUIPMENT.
FIRST AID PROC: OF WATER AND INDUCE VOMIT. IF ILLNESS OR ADVERSE
SYMPTOMS DEVELOP, SEEK MED ATTN.

Chemical Properties

HCC:V6
Vapor Pres:<1@20C
Vapor Density:>5
Spec Gravity:SUPP DATA
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS TO DARK LIQUID, MILD ODOR.
Percent Volatiles by Volume:NEGLIG

Stability

Stability Indicator/Materials to Avoid:YES
O2 AND STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON OXIDES AND VARIOUS HYDROCARBONS
FORMED WHEN BURNED.

Disposal

Waste Disposal Methods:INSURE CONFORMITY WITH ALL APPLICABLE DISPOSAL
REGULATIONS. INCINERATE OR OTHERWISE MANAGE @ A PERMITTED WASTE
MANAGEMENT FACILITY. DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.